Overview of the room list with IFC connected

Recommend reading Room module IFC Options before moving forward.

1. Navigation panel. When IFC is connected you will see an additional tab called ‘IFC’ which will contain the models spatial structure. You can chose to navigate room based on functional location, room groups or spatial structure.

2. In the BIM-tab in the ribbon menu, the icon Rooms Match opens a window displaying lists of rooms and “Link status” between the model and dRofus.
   

   

3. Displays list of rooms depending on what you have selected in the navigation panel. If you navigate by spatial structure in the IFC-tab, rooms that only exist in the model will also be displayed.

4. This window displays all properties (object properties and property sets) related to the IFC object marked either in the tree or list. There are also buttons for synchronizing the active object, viewing the object and details, and change viewing settings.

5. 3D viewing window

6. Occurrence Match- Shows a comparison of Occurrences in dRofus and in the model

Symbols when you are under a function/sub-function::

	Rooms are in the model, but not in the room program. This means that dRofus does not find any room with the same ID in the room list. Either because the room was not created in dRofus, or because the room has the wrong ID in the model (according to configuration).
	This icon is displayed to indicate that the room exists in the model and is connected to a room in dRofus
Other symbols	All other symbols indicate that dRofus does not find the room with the same ID in the model. That means the rooms are not in the model, or that the rooms have not been connected(due to missing or incorrect ID)

Symbols when you are under a level in model (2):

	This icon appears with an exclamation mark to indicate that the room does not exist in the room program (or has not been able to connect to it due to incorrect ID).
	This icon appears when the rooms in the model are connected to a room in the room program.