Page Comparison

The log can be opened from the majority of windows where changes are logged. The log will then be displayed for the room/Item in question etc. The log can also be opened from the top menu Log-> Logs.

...

In this window, the log is divided into 7 parts6 types;

• Room

• Room template

• Groups

• Function program

• Item

• Existing equipment

  TIDA

Once you have chosen the type of log you want to search in, you can filter further using Logs/Events. If for example you only want to see has been selected, a filter for Action and data can be set. Example: Select Room Data to only display changes to Room Data, then you select Room Data. You can also filter data from a specific tab in the Room Data form and finally a specific field under this tab. If you want, for example, to view all the changes to Room Data over the past month for room in function 15 for fields which involve Electro, you do the following: Choose Room Data log in the Log field, type in 15 in the no. field to limit the filter to the rooms you want. Enter "El" in field to choose the correct fields then finally enter the last month under from date. Figure 34 below provides an example of the above.

...

Tip: You can also search through all the logs at the same time. To do so, choose "Search in all" then choose log type. The logs in which the different log entries are displayed are shown in the Log column.Image Removed