Recommend reading IFC Attribute Configurations before moving forward
In order to create a new, or edit an existing, Attribute Configuration, open the configuration editor by selecting the "Edit" button against the type of Configuration you would like to work on (refer below).
| Info |
|---|
Note: Project Administrator Rights is required to edit, delete or create new configuration |
Select “Attribute configuration in the ribbon menu under det “BIM” tab. Window will appear:
...
Select “edit” beside the configuration that should be edited.
The following window will appear for (for e.g.) Room <-> IFC Room configuration先へ進む前にお読みいただくことをお勧めします：IFC属性の構成
属性構成を新規に作成、または既存の属性構成を編集するには、編集したい属性構成に対して "Edit (編集)"ボタンを選択し、構成エディタを開きます (下記参照)。
| Info |
|---|
注意：構成の編集、削除、新規作成には、プロジェクト管理者権限が必要です。 |
リボンメニューの "BIM "タブの下の “Attribute configuration (属性構成)"を選択します。以下のウィンドウが表示されます。:
...
編集する構成の横にある "edit (編集)"を選択します。
例) 部屋 <-> IFC 部屋の構成のために、次のウィンドウが表示されます。:
...
Select configuration in the drop-down-menu or create new
Create a new configuration by clicking on either "New" or (to create a new configuration based on the currently selected configuration) "Copy".
To delete an existing configuration, select the configuration within the "Choose Configuration" drop-down menu, then click on "Delete".
To rename an existing configuration, select the configuration within the "Choose Configuration" drop-down menu, then click on "Rename".
Set "Configuration properties":
Available to users: If this is checked all Users can see / use this configuration. If it is not checked, only those Users who have Project Administrator Rights can view / use this configuration.
Is default configuration: If this is checked, it means that this configuration will be the default configuration for all Users.
In addition, General Users can setup User-based default configurations for each configuration type within the Attribute Configuration Settings dialog, so that henceforth an alternate configuration will override as the default configuration for each configuration type for that particular User.
| Info |
|---|
Note that the configuration named "Default" cannot be edited, deleted or renamed, but you can create your own version of this by selecting it and clicking on "Copy". |
Link attributes
Select the dRofus Attributes that you would synchronize data to / from (which have not already been mapped within the current configuration).
Select the IFC attribute that you would synchronize data to / from (which have not already been mapped within the current configuration).
...
Select a mapping within the list of linked Attributes / Parameters
Select "Unlink".
Create new attributes in IFC
Data can be sent from dRofus to the IFC file even if the corresponding attribute is not available in the IFC file. Select a dRofus property on the top-left section and select New--> as action. A new window will appear where the Property set name and Property name for the new property in IFC can be defined.
...