...
...
...
...
...
...
...
Attribute configuration:
Steps that must be taken before linking Systems.
1. Synchronization Options
...
Go to “options…”
Select “Include physical connectors” if you will include all physical connectors as elbows, fittings, cables ect
Tick the box if you would link dRofus System with Revit System Type. If the box is not ticked the dRofus Systems would be linked with Revit System Name
2. Attribute configuration:
All kinds of system data can be exchange between dRofus and Revit. Which data that would be exchanged are set in the Attribute configuration.
Systems Configurations:
Revit Systems attribute configuration is used when link System in dRofus with the corresponding Revit System Name.
Revit System Types attribute configuration is used when linking system in dRofus with the corresponing Revit System Type.
Read more Relationship between Revit Systems and dRofus Systems
3. Link Family
Link Revit Family Link dRofus Items and Families types
Link Systems
...
Select “Systems” to open the “Systems <--> Revit Systems” window
...
...
Select System Category from the drop-down menu
Select the Planned System in dRofus
Select System in Revit
Select ↔︎ to link
...
4. Select Synchronize System data (If you would like to sync what? attribute configuration ???)
5. Select Import/Update Occurrences (Is it system component and component you are selecting?)
6. Select it you would like to move occurrences to this model (what do this mean??)
7. Select “Ok”