Part 1: Import System from Revit to dRofus

...

Now that we have shown some of the options for connecting Systems, we wanted to review a potential output that illustrates the connections that the Systems Module is capable of. 

...

Let’s start by syncing our project with Revit. In this example we :

1. We are going to select the Air Handling Unit that we used in our prior examples. Once the unit is selected, we can link into our project in dRofus.

2. Select the Air Handling Unit in the window that appears. 

3. Go to the dRofus Plug-in, and select Import Selected.

4. In the pop-up window confirm your selection and select Import.

After the import has completed, you can view the results in our dRofus project. 

 Potential Outputs with Systems

View IFC in dRofus

...

...

desktop:

...

 Let’s go back into the Systems Module.

1. Before getting started you will need to connect to your IFC file to the dRofus project. 

2. Once you have connected your IFC file, you can select the 3D model on the right-hand ribbon. This will open the model viewer pane.

3. You can then select the item group, and you will see the linked items in the viewer.

...

You can now see the System is now highlighted in our 3D model view. 

...